alaTest Sites
About alaTest
Connect with alaTest
alaTest, All about reviews. © 2005-2025 ICSS AB. All rights reserved. Privacy & Terms
6 reviews
Jun, 2025
alaTest has collected and analyzed 6 reviews of Scythe Slot Rafter 2.5"-Drives (HDD/SSD) Mounter. The average rating for this product is 4.9/5, compared to an average rating of 4.5/5 for other products in the same category for all reviews.
On average, users rate this product 97/100.
Consumer review (newegg.com)
larger then i expected but serves its purpose well
none
Consumer review (newegg.com)
I mounted one of these in a Supermicro 3U server chassis with 15 hotswap drive bays for some fast mirrored boot drives. I couldn't use the 2 vertical mounts because of height. I didn't have any open PCI-X slots, but I had a few PCIe slots. I whittled...
Cheap solution for mounting SSD in a system that was not designed to house 2.5" drives
The fins won't line up on PCIe slots. They could have these PCIe compatible by using smaller fins. The fins just serve as stabilizers and don't need to fill up the whole slot
Consumer review (newegg.com)
This will work for 2.5 two ssd two fans you don't need the fans
It works $9.99 this works. next day. thank you newegg
Good buy
Consumer review (newegg.com)
I have 2 80mm Rosewill fans blowing at my Diamond Ultimate silent 5670 card. perfect application for this. I don't know if I needed it or not, but I didn't want to buy a "fanned" graphics card...I wanted to control the fan speed (and consequently, the...
Great. Nuff said
Umm, don't know about mounting two hard drives to this. Maybe, I haven't tried
Consumer review (newegg.com)
Reference: E8400 system at 37C. Sparkle 9500GT Passive, Rocket-V on LO = 40C. Tested EFX 7600GT card with heat sink only, fan removed, Arctic Silver-5 paste. GPU Core temp with Rocket-V on HI = 49C. Slot Rafter with (2) 80x25 2200 rpm/12v fans = 46C....
Very useful for passive video card and north bridge cooling. Reasonable price, very sturdy construction, flexible use ; Allows use of 2-Ball 80x25 fans (Newegg #N82E16811999703) without fear of sleeve bearing failure with vertical axle mounting. These...
PCI locating fins do not match PCI-E slots without Dremel work. This is no big deal, just something to point out ; Full height slots only. Fit with half-height HTPC cases is not known to me
Consumer review (newegg.com)
Sturdy ; and good placement of mounts
would have worked better if the hard drive mounts were on the opposite side of the rafter so it only took up one pci slot not two
Please select your alaTest site to get local reviews and prices:
We have local websites in the following countries: